B&K Reference 20 Plus A/V System Controller Manual do Utilizador descarregar pdf (Página 15)

VM801P Embedded Video Engine Plus Module Datasheet

Version 1.0

Document Reference No.: FT_001102 Clearance No.: FTDI#426

4 Arduino

Setup

FTDI provides sample source code, sample application notes and a ready to run demo based on

the Arduino

platform. Detailed information can be found at:

http://www.ftdichip.com/Support/Documents/AppNotes/AN_318_Arduino_Library_for_FT801_Seri

es.pdf

http://www.ftdichip.com/Support/Documents/AppNotes/AN_275_FT801_Example_with_Arduino.pd

http://www.ftdichip.com/Support/Documents/AppNotes/AN_246%20VM801CB_SampleApp_Arduin

o_Introduction.pdf

4.1 Hardware Setup

 Connect a USB cable (suggest FTDI accessory VA-FC-1M-BKW or VA-FC-1M-BLW) from the

VM801P USB port CN2 to the PC USB host port or self-powered hub port.

 The USB will supply power to the VM801P module after the FTDI FT232R driver is properly

loaded and the USB host completes USB device configuration.

4.2 Software Setup

The arduino code can be downloaded from the Arduino IDE to the ATMEGA328P through the USB

connector CN2 connected to the PC. The USB connector CN2 is also used to display debug output

from the ATMEGA328P to the PC terminal application.

Default sample code is downloaded to the ATMEGA328P during the VM801P module

manufacturing. When the VM801P is connected to the PC through the USB connector CN2, the

VM801P is powered up and the sample code is functional with the demo applications.

 Download the Arduino IDE from http://arduino.cc/en/main/software.

 Install the Arduino IDE

 Open the Arduino IDE

 Open the FT801 sample project to be downloaded to the VM801P

(Examples are available from:

http://www.ftdichip.com/Support/SoftwareExamples/FT800_Projects.htm

Or you may have developed your own code)

 Select the Tools->Board-> Arduino Pro or Pro Mini(5V, 16MHz) w/ATmega328 as shown in

Fig 4.1.

 Select the Tools->Serial Port->COMxx corresponding to the VM801P as shown in Fig 4.2.

 Click the Upload button as shown in Fig 4.3. This will upload the FT801 sample to the

VM801P.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Sem comentários

B&K Reference 20 Plus A/V System Controller Manual do Utilizador Página 15