B&K 50 Series II Manual do Utilizador descarregar pdf (Página 25)

Disconnect all cables including the power cord from the instrument when changing the

instrument's line voltage. After changing the line voltage setting, ensure the instrument has

fuses of the proper ratings and types for the selected line voltage before applying line power.

Fuse Requirements

An AC input fuse is necessary when powering the instrument. Below is a table of the fuse

required for all models operating with either 110 VAC or 220 VAC input.

Table 1 - Fuse Requirements

Model

Fuse Specification (110 VAC)

Fuse Specification (220 VAC)

8600

T 1.25 A, 250 V

T 500 mA, 250 V

8601

T 1.25 A, 250 V

T 500 mA, 250 V

8602

T 1.25 A, 250 V

T 500 mA, 250 V

Fuse Replacement

Follow the steps below to replace or check the fuse.

1. Locate the fuse box next to the AC input connector in the rear panel.

2. With a small flat blade screwdriver, insert into the fuse box slit to pull and slide out the

fuse box as indicated below.

3. Check and replace fuse (if necessary) for the desired line voltage operation.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 101 102

Sem comentários

B&K 50 Series II Manual do Utilizador Página 25