
APPENDIX C
Analyzer Parameters
275
Microphone Type 4189
4190
4191
4950
4955-A
4193
4193, UC-0211
4964
4964, UC-0211
4952 0
4952 90
4184-A 0
4184-A 90
EH-2152 0°
EH-2152 90°
Unknown
Microphone only: If the microphone is a
known type, then the rest of the parameters
of the transducer are set automatically. Sound
Field Correction and Windscreen Correction
are possible for known microphone types only.
Note: Microphone Types 4952 and 4184-A
can be used with 0 reference direction or 90
reference direction.
For unknown microphone types, set the rest
of the parameters – no corrections can be
made for unknown types
Note: If you are unsure which microphone to
use, please refer to Table C.5, which gives an
overview of the microphones, where they can
be used and their specifications
Accelerometer Type 4397-A
4513
4513-001
4513-002
4514
4514-001
4514-002
4533-B
4533-B-001
4533-B-002
4534-B
4534-B-001
4534-B-002
6233-C-10
8324
8341
8343
8347-C, 2647-D
Unknown
Accelerometer only: If accelerometer is a
known type, then the rest of the parameters
of the transducer are set automatically.
For unknown accelerometer types, set the
rest of the parameters.
Nominal Sensitivity Double Set automatically for known type.
Otherwise set the nominal sensitivity in mV/Pa
for microphones; in mV/(m/s
2
) for
accelerometers; and in V/V for Direct input
Polarization Voltage Yes
No
Microphone only: Set to No if microphone is
prepolarized, otherwise set to Yes for
polarization voltage of 200 V (Top Socket
only).
Set automatically for known Microphone Type
Table C.2 (Cont.) Transducer Setup parameters (for Microphone, Accelerometer or Direct, un-
less stated otherwise)
Parameter Values Comment
Comentários a estes Manuais