B&K 2250 Light Manual do Utilizador descarregar pdf (Página 96)

Hand-held Analyzer Types 2250 and 2270 – User Manual

8.3.1 Connecting to the Analyzer

Wired LAN Connection

• Use a “straight-through” (standard) Ethernet cable with RJ45 connectors at both ends to

connect the analyzer to the network (via a hub, switch or router)

• Use a “crossover” Ethernet cable with RJ45 connectors at both ends to connect the

analyzer directly to a PC

Hardware version 4 has an Auto-MDIX facility, allowing you to use either a straight-through

or crossover cable to connect to a network or PC.

With hardware versions 1 – 3, only Type 2270 has a built-in LAN socket on the connector

panel (see section 2.3).

WLAN Connection

Types 2250 and 2270 provide a wireless LAN option using a WLAN card.

Types 2250 and 2270 with hardware version 4 accept the following SD WLAN card:

• P322 802.11a/jointfilesconvert/367447/bg SD WLAN from Socket Mobile (www.socketmobile.com) –

Brüel & Kjær order number UL-1025

Types 2250 and 2270 with hardware versions 1 – 3 accept the following compact flash LAN

and WLAN cards:

• 10/100 Ethernet Ruggedized CF Card from Socket Mobile (www.socketmobile.com) –

Brüel & Kjær order number UL-1016

•Go Wi-Fi!

P500 CF WLAN, rev. B and rev. C from Socket Mobile – Brüel & Kjær order

number UL-1019

8.3.2 Parameters in Network Settings

Location

Use the Location parameter to specify a text up to 20-character long, identifying the

analyzer or location of the analyzer. The Location will be displayed on the PC as well as

the serial number of the analyzer when browsing for analyzers in BZ-5503 and when

connected using the online display

Note: The Location parameter is useful for both USB and LAN connections

Network Connection

• Hardware versions 1 – 3:

Type 2250:

– None: (default)

– CF Socket: Select this to use an Ethernet CF Card in the Compact Flash socket

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 331 332

Sem comentários

B&K 2250 Light Manual do Utilizador Página 96